Stainless Steel Transducer Cover - Large

Stainless Steel Transducer Cover – Large

$71.50

Description

Large Stainless Steel Transducer Cover – Frustrated by water spraying into your boat and all over your passengers, or you can’t get a clear picture on your sounder? well if you answered yes, you are a candidate for a transducer cover. These 316 stainless steel covers will eliminate the spray from your speedo or transducer and reduce water noise while travelling on your sounder, giving you a much clearer picture. dimensions: 200mm long x 150mm wide at the mounting tabs, then tappers down to the front Available in Small (90014) , Large (90015) and now the Extra large (90130) And now available with Reverse Mounting Tabs: Small (90131) Large (90132)

Large Stainless Steel Transducer Cover
Frustrated by water spraying into your boat and all over your passengers, or you can’t get a clear picture on your sounder? well if you answered yes, you are a candidate for a transducer cover.

These 316 stainless steel covers will eliminate the spray from your speedo or transducer and reduce water noise while travelling on your sounder, giving you a much clearer picture.

dimensions: 200mm long x 150mm wide at the mounting tabs, then tappers down to the front

Available in Small (90014) , Large (90015) and now the Extra large (90130)

And now available with

Reverse Mounting Tabs: Small (90131) Large (90132)

Additional information

Packaged Weight 1 kg
Packaged Dimensions 18 × 18 × 23 cm
SKU: VIPER-90015 Category: Brand:

Related products

  • Viper Pro Series Side Mount ROD Holder - 4 Way

    Viper Pro Series Side Mount ROD Holder – 4 Way

    $187.00

    Viper Pro Series Side Mount ROD Holder – 4 Way

    Viper Deluxe 4 Way Combing Rack Now available in 1, 2, 4, 6 and 8 way versions! Sick of your lines tangling, rods getting damaged or even stood on and broken? these deluxe side mount combing rod holders simply bolt to the side of your boat, and no matter how rough it gets your rods and passengers are safe! The Viper deluxe version has rolled bottoms to each of the holders to eliminate sharp edges against your feet. The mounting bar is 15mm x 40mm square tube with fully welded gimble pins to stop your rods from spinning and damaging your gelcoat. The holders also come with heavy duty end caps to protect your rod butts! The rod holders and mounting square tube are 316 Stainless Steel and are hand polished to a mirror finish. Overall length:  500 mm Overall height: 250mm Distance between chimney’s/rod holder: 85 mm

    SKU: VIPER-10015 Category: Brand:
    $187.00
  • Viper Pro Series 10 Way Corner ROD Rack

    Viper Pro Series 10 Way Corner ROD Rack

    $638.00

    Viper Pro Series 10 Way Corner ROD Rack

    The easiest DIY corner rod rack to ever hit the market! Save yourself the expense of having a rack custom made for your boat. This version has 3 straight legs each side. Two legs fit into the supplied deck fittings 2 on each side, then you simply cut the middle support leg to suit your desired height to rest against your boats gunwale area. Now you can fish 10 rods, keep an eye on all rods at once and have your family and friends in the boat without tripping over rods and tackle. Each rod holder is a double wire construction and made from hand polished 316 marine grade stainless steel. The corner racks are removable if required, simply lift them out in one piece. Package Contents: Both port and starboard sides (5 rod holders each side), 4 x female deck fittings, 6 x straight 25mm legs, 6 x T-Piece connectors. Also available in an a tapered version to fit into your existing 30 degree rod holder, see part number 10016.

    SKU: VIPER-10030 Category: Brand:
    $638.00
  • Viper Pro Series Slimline Single ROD Holder

    Viper Pro Series Slimline Single ROD Holder

    $68.20

    Viper Pro Series Slimline Single ROD Holder

    Available In 0, 15 and 30 Degrees These Heavy Duty Stainless Steel Flush Mount Rod Holders Are Fully Welded, Hand Polished To A Mirror Finish. Designed For Those Tight Spaces Such As Narrow Gunnels And Gives You That Custom Proffessional Look.
    Tube Id Is 41mm and 1.5mm Wall and Includes Welded Gimble Pins In The Base To Stop Your Rods From Spining – Life Time Warranty
    Flange Size 85mm X 61mm
    Tube Id 41mm
    Tube L 210mm

    SKU: VIPER-10009 Category: Brand:
    $68.20
  • Deck Fitting For Corner ROD Rack

    Deck Fitting For Corner ROD Rack

    $39.60

    Deck Fitting For Corner ROD Rack

    This 25mm (O.D.) tube female deck fitting is ideal for any custom 25mm (O.D.) stainless tube works such as corner rod racks, cutting boards, BBQ’s, basically any item that need to be fitted to your boat that is made from 25mm (O.D.) tube. This 25mm (O.D.) tube female deck fitting also has built-in gimble pin to stop your tube falling through. No matter what you need to fit, these laser cut, hand polished deck fittings will save you many hours of work and big dollars! Constructed from 316 Marine Grade Stainless Steel and hand polished to a mirror finish. Includes: One (1) X 25mm (O.D.) tube Female deck fittings

    SKU: VIPER-10019 Category: Brand:
    $39.60