$1,276.00
Designed To Fit Most Hard Tops These Marine Grade 316 Stainless Steel Rocket Launchers Are Fully Welded And Hand Polished To A Mirror Finish. Includes 6 Mounting Brackets For All Your Accessories Plus 6 Heavy Duty Rod Holders To Keep Your Rods Safe And Provisions For Your Internal Wiring Is Included. Add The Ultimate Bling To Your Hardtop And Run All Your Wiring Internally! 4 X 8mm Holes For Mounting Is Provided Packaging: 145CM X 45CM X 17 CM – 7 KG
Designed To Fit Most Hard Tops These Marine Grade 316 Stainless Steel Rocket Launchers Are Fully Welded And Hand Polished To A Mirror Finish. Includes 6 Mounting Brackets For All Your Accessories Plus 6 Heavy Duty Rod Holders To Keep Your Rods Safe And Provisions For Your Internal Wiring Is Included. Add The Ultimate Bling To Your Hardtop And Run All Your Wiring Internally! 4 X 8mm Holes For Mounting Is Provided
Packaging: 145CM X 45CM X 17 CM – 7 KG
| Packaged Weight | 10 kg |
|---|---|
| Packaged Dimensions | 22 × 55 × 160 cm |
Viper Deluxe 6 Way Combing Rod Rack Sick of your lines tangling, rods getting damaged or even stood on and broken? these deluxe side mount combing rod holders simply bolt to the side of your boat, and no matter how rough it gets your rods and passengers are safe! The Viper deluxe version has rolled bottoms to each of the holders to eliminate sharp edges against your feet. The mounting bar is 15mm x 40mm square tube with fully welded gimble pins to stop your rods from spinning and damaging your gelcoat. The holders also come with heavy duty end caps to protect your rod butts! The rod holders and mounting square tube are 316 Stainless Steel and are hand polished to a mirror finish. Overall length: 720 mm Overall height: 250mm Distance between chimney’s/rod holder: 85 mm
Viper Pro Series Double Wire 6 Way Stainless Steel Rod Rack Designed to be used with our 50001 Bait Board A DIY non welded version is also available, see part number 10032
The easiest DIY corner rod rack to ever hit the market! Save yourself the expense of having a rack custom made for your boat. This version has 3 straight legs each side. Two legs fit into the supplied deck fittings 2 on each side, then you simply cut the middle support leg to suit your desired height to rest against your boats gunwale area. Now you can fish 10 rods, keep an eye on all rods at once and have your family and friends in the boat without tripping over rods and tackle. Each rod holder is a double wire construction and made from hand polished 316 marine grade stainless steel. The corner racks are removable if required, simply lift them out in one piece. Package Contents: Both port and starboard sides (5 rod holders each side), 4 x female deck fittings, 6 x straight 25mm legs, 6 x T-Piece connectors. Also available in an a tapered version to fit into your existing 30 degree rod holder, see part number 10016.
