$106.70
The 400AMP, 12V marine grade reversing solenoids are designed for the 1500w Viper winches. They can also be used for many other applications. Designed to suit the harsh marine environment. Connections Included: 1 x Positive terminal 1 x Negative terminal 2 x Winch motor terminals 3 x Switch terminals (forward, reverse and 1 negative)
The 400AMP, 12V marine grade reversing solenoids are designed for the 1500w Viper winches. They can also be used for many other applications. Designed to suit the harsh marine environment. Connections Included: 1 x Positive terminal 1 x Negative terminal 2 x Winch motor terminals, 3 x Switch terminals (forward, reverse and 1 negative)
| Packaged Weight | 0.5 kg |
|---|---|
| Packaged Dimensions | 10 × 10 × 10 cm |
Available In 0 and 30 Degrees New Game Rated Version. These Slim Line Rod Holders Are Fully Welded And Designed For Those Tight Spaces Or Narrow Gunnels And Give You That Custom Pro Look! They Can Also Be Used To Hold Your Bait Board Legs, Bbq Etc Etc. Tube Id – 41mm, Tube Wall 1.5mm, Height 205mm (from under the flange), Top Flange 5mm Thick Plate, 83mm X 60mm with 4 Fixing Holes To Secure Them In Place.
Viper 5 Year Warranty
Ever Wanted A Rod Holder In A Particular Position But You Can’t Buy Them Off The Shelf Anywhere? Well Now You Can Use As Many As Needed And Add Them To Your Grab Rails, Rocket Launcher, Bow Rails Etc. It’s As Simple As Simply Taking Them To Your Local Fabricator And He Can Tack Them On In A Matter Of Minutes. Made From Marine Grade 316 Stainless Steel And Hand Polished To A Mirror Finish, You Can’t Go Past These Custom Weld On Rod Holders!
Viper Pro Series Double Wire 4 Way Stainless Steel Rod Rack Designed to be used with our 50013 Bait Board
The easiest DIY corner rod rack to ever hit the market! Save yourself the expense of having a rack custom made for your boat. This version has a tapered leg each side and 2 straight legs. One leg fit into the supplied deck fitting 1 each side, the other long tapered leg fits into your existing 30 degree rod holder in your boat, then you simply cut the middle support leg to suit your desired height to rest against your boats gunwale area. Now you can fish 10 rods, keep an eye on all rods at once and have your family and friends in the boat without tripping over rods and tackle. Each rod holder is a double wire construction and made from hand polished 316 marine grade stainless steel. The corner racks are removable if required, simply lift them out in one piece. Package Contents: Both port and starboard sides (5 holders each side), 2 x female deck fittings, 4 x straight 25mm legs, 2 x tapered legs, 4 x T-Piece connectors and 2 x angled connectors. Also available in an all straight leg version, see part number 10030.
