Description
Viper Marine Circuit Breakers HT-01A 3 To 30amp Circuit Breakers 125/250V AC 32V DC 50/60HZ CE Approved 2 Pole – W30mm X H33mm X D13mm Supplied In Retail Blister Pack Does Not Include Water Proof Reset Button Cover
10 Amp Circuit Breaker – Manual Reset
$8.80
Viper Marine Circuit Breakers HT-01A 3 To 30amp Circuit Breakers 125/250V AC 32V DC 50/60HZ CE Approved 2 Pole W30mm X H33mm X D13mm Does Not Include Water Proof Reset Button Cover
Additional information
| Packaged Weight | 0.5 kg |
|---|---|
| Packaged Dimensions | 10 × 10 × 10 cm |
Related products
-
Viper Pro Series Side Mount ROD Holder – Single
$66.00Viper Pro Series Side Mount ROD Holder – Single
Now available in 1, 2, 4 and 6 way versions! Sick Of Your Lines Tangling, Rods Getting Damaged Or Even Stood On And Broken? These Deluxe Side Mount Combing Rack Rod Holders Simply Bolt To The Side Of Your Boat And No Matter How Rough It Gets Your Rods and Passengers Are Safe! The Viper Deluxe Version Has Rolled Bottoms, The Mounting Bar Is 10mm Tube With Fully Welded Gimble Pins To Stop Your Rods From Spinning And Damaging Your Gelcoat And The Rubber End Caps Protect Your Rod Butts! Overall length: 110mm Overall height: 250mm
$66.00 -
Rocket Launcher Chimney/ROD Holder With Abs Plastic Top
$38.50Rocket Launcher Chimney/ROD Holder With Abs Plastic Top
Ever Thought About Making Your Own Custom Rocket Launcher, Combing Rack, Having A Couple Of Extra Rod Holders In Certain Positions Or J Ust Want To Make A Rod Rack For The Man Cave? Well Now You Can With These Thick Walled 316 Marine Grade Stainless Steel Rod Chimneys, Hand Polished To A Mirror Finish, With Rolled Bottoms, Welded Gimble Pins To Stop Your Rods Spining, And Plastic Tops To Protect Your Rod Butts. They Can Be Either Bolted Or Welded To Basically Anything Without It Costing You A Fortune In Fabrication.
$38.50 -
Viper Pro Series Slimline Single ROD Holder 30 Deg
$68.20Viper Pro Series Slimline Single ROD Holder 30 Deg
Available In 0 and 30 Degrees, New Game Rated Version, These Slim Lines Rod Holders Are Fully Welded And Designed For Those Tight Spaces Or Narrow Gunnels And Give You That Custom Pro Look! They Can Also Be Used To Hold Your Bait Board Legs, Bbq Etc Etc. Tube Id – 41mm, Tube Wall 1.5mm, Height 230mm (from under the flange), Top Flange 5mm Thick Plate, 83mm X 60mm with 4 Fixing Holes To Secure Them In Place.
$68.20 -
Viper Pro Series 10 Way Corner ROD Rack
$638.00Viper Pro Series 10 Way Corner ROD Rack
The easiest DIY corner rod rack to ever hit the market! Save yourself the expense of having a rack custom made for your boat. This version has a tapered leg each side and 2 straight legs. One leg fit into the supplied deck fitting 1 each side, the other long tapered leg fits into your existing 30 degree rod holder in your boat, then you simply cut the middle support leg to suit your desired height to rest against your boats gunwale area. Now you can fish 10 rods, keep an eye on all rods at once and have your family and friends in the boat without tripping over rods and tackle. Each rod holder is a double wire construction and made from hand polished 316 marine grade stainless steel. The corner racks are removable if required, simply lift them out in one piece. Package Contents: Both port and starboard sides (5 holders each side), 2 x female deck fittings, 4 x straight 25mm legs, 2 x tapered legs, 4 x T-Piece connectors and 2 x angled connectors. Also available in an all straight leg version, see part number 10030.
$638.00
