Rod Holders
Showing 17–32 of 43 results
-
ROD Holder For Adjustable Combing Rack
$35.00 -
Rubber ROD Holder Insert With Cap – 0 Deg
$18.00 -
Rubber ROD Holder Insert With Cap – 30 Deg
$18.00 -
Snapper Rack For Small Baitboard
$295.00Snapper Rack For Small Baitboard
Viper Pro Series Double Wire 4 Way Stainless Steel Rod Rack Designed to be used with our 50013 Bait Board
$295.00 -
Universal Stainless Steel Rocket Launcher – 1600-1800mm
$1,455.00Universal Stainless Steel Rocket Launcher – 1600-1800mm
Bell Marine’s Roots Are In Manufacturing Rocket Launchers, Bow Rails, Etc For Many Of The Boat Builders In Australia. These Three Piece Rocket Launchers Are Fully Welded, Linished And Hand Polished To A Mirror Finish. The 3 Piece Was Developed Because Of The Age Old Problem That One Piece Rocket Launchers Eventually Crack On The Stress Points Such As The Top Bends And Where The Chimneys Attach Etc. Further To This We Are Now Able To Ship Them Almost Anywhere In Oz Or World-Wide Using Conventional Couriers And You Won’t Have To Mortgage Your First Born To Pay For The Transport Cost! Includes: 5 Mounting Brackets Included For Accessories Such As Flood Lights, Radio Aerials, GPS Aerial, Etc 6 Chimneys With Rolled Bottoms, Gimble Pins And Plastic Tops To Protect Your Rods. Rear Grab Rails For Passenger Comfort And Safety. M8 Eye Bolts To Collapse Your Rocket Launcher For Storage. Bimini Mounting Rail Built-In. Constructed from Marine Grade 316 Stainless Steel and hand polished to a mirror finish. Rocket Launcher P/N 2008 will fit boats with a wind screen width of between 1600 mm and 1800 mm where the wind screen meets your deck ( rear). Top Width between bends 1500mm Height (head clearance to deck) 1260mm Packaging : 179 X 21 X 46 cm – 17 kg All hardware required to fit your rocket launcher is provided
$1,455.00 -
Universal Stainless Steel Rocket Launcher – 1800 – 2000mm
$1,510.00Universal Stainless Steel Rocket Launcher – 1800 – 2000mm
Bell Marine’s Roots Are In Manufacturing Rocket Launchers, Bow Rails, Etc For Many Of The Boat Builders In Australia. These Three Piece Rocket Launchers Are Fully Welded, Linished And Hand Polished To A Mirror Finish. The 3 Piece Was Developed Because Of The Age Old Problem That One Piece Rocket Launchers Eventually Crack On The Stress Points Such As The Top Bends And Where The Chimneys Attach Etc. Further To This We Are Now Able To Ship Them Almost Anywhere In Oz Or World-Wide Using Conventional Couriers And You Won’t Have To Mortgage Your First Born To Pay For The Transport Cost!
Includes: -5 Mounting Brackets Included For Accessories Such As Flood Lights, Radio Aerials, Gps Aerial, Etc -6 Chimneys With Rolled Bottoms, Gimble Pins And Plastic Tops To Protect Your Rods. -Rear Grab Rails For Passenger Comfort And Safety. -M8 Eye Bolts To Collapse Your Rocket Launcher For Storage – Bimini Mounting Rail Built-In. Constructed from Marine Grade 316 Stainless Steel and hand polished to a mirror finish Rocket Launcher P/N 20015 will fit boats with a wind screen width of between 1800 mm to 2000 mm where the wind screen meets your deck ( rear). Top Width between bends 1700mm Height (head clearance to deck) 1260mm Packaging : 198 cm X 21 cm X 46 cm – 19 kg – All hardware required to install your rocket launcher is supplied$1,510.00 -
Universal Stainless Steel Rocket Launcher – 2000 – 2200mm
$1,565.00Universal Stainless Steel Rocket Launcher – 2000 – 2200mm
Bell Marine’s Roots Are In Manufacturing Rocket Launchers, Bow Rails, Etc For Many Of The Boat Builders In Australia. These Three Piece Rocket Launchers Are Fully Welded, Linished And Hand Polished To A Mirror Finish. The 3 Piece Was Developed Because Of The Age Old Problem That One Piece Rocket Launchers Eventually Crack On The Stress Points Such As The Top Bends And Where The Chimneys Attach Etc. Further To This We Are Now Able To Ship Them Almost Anywhere In Oz Or World-Wide Using Conventional Couriers And You Won’t Have To Mortgage Your First Born To Pay For The Transport Cost! Includes: -5 Mounting Brackets Included For Accessories Such As Flood Lights, Radio Aerials, GPS Aerial, Etc -6 Chimneys With Rolled Bottoms, Gimble Pins And Plastic Tops To Protect Your Rods. -Rear Grab Rails For Passenger Comfort And Safety. -M8 Eye Bolts To Collapse Your Rocket Launcher For Storage. -Bimini Mounting Rail Built-In. Constructed from Marine Grade 316 Stainless Steel and hand polished to a mirror finish -Rocket Launcher P/N 20016 will fit boats with a wind screen width of between -2000 mm to 2200 mm where the wind screen meets your deck ( rear). -Top Width between bends 1900mm -Height (head clearance to deck) 1260mm -Packaging : 198 cm X 21 cm X 46 cm – 20 kg -All hardware required to install your rocket launcher is supplied
$1,565.00 -
Viper 1/2 Tube 6 Way ROD Holder for Large Fibreglass Bait Board
$490.00Viper 1/2 Tube 6 Way ROD Holder for Large Fibreglass Bait Board
Viper Pro Series 1/2 tube 6 Way Stainless Steel Rod Rack for Viper Large Fibreglass Bait Board
$490.00 -
Viper Pro Series 10 Way Corner ROD Rack
$580.00Viper Pro Series 10 Way Corner ROD Rack
The easiest DIY corner rod rack to ever hit the market! Save yourself the expense of having a rack custom made for your boat. This version has 3 straight legs each side. Two legs fit into the supplied deck fittings 2 on each side, then you simply cut the middle support leg to suit your desired height to rest against your boats gunwale area. Now you can fish 10 rods, keep an eye on all rods at once and have your family and friends in the boat without tripping over rods and tackle. Each rod holder is a double wire construction and made from hand polished 316 marine grade stainless steel. The corner racks are removable if required, simply lift them out in one piece. Package Contents: Both port and starboard sides (5 rod holders each side), 4 x female deck fittings, 6 x straight 25mm legs, 6 x T-Piece connectors. Also available in an a tapered version to fit into your existing 30 degree rod holder, see part number 10016.
$580.00 -
Viper Pro Series 10 Way Corner ROD Rack
$580.00Viper Pro Series 10 Way Corner ROD Rack
The easiest DIY corner rod rack to ever hit the market! Save yourself the expense of having a rack custom made for your boat. This version has a tapered leg each side and 2 straight legs. One leg fit into the supplied deck fitting 1 each side, the other long tapered leg fits into your existing 30 degree rod holder in your boat, then you simply cut the middle support leg to suit your desired height to rest against your boats gunwale area. Now you can fish 10 rods, keep an eye on all rods at once and have your family and friends in the boat without tripping over rods and tackle. Each rod holder is a double wire construction and made from hand polished 316 marine grade stainless steel. The corner racks are removable if required, simply lift them out in one piece. Package Contents: Both port and starboard sides (5 holders each side), 2 x female deck fittings, 4 x straight 25mm legs, 2 x tapered legs, 4 x T-Piece connectors and 2 x angled connectors. Also available in an all straight leg version, see part number 10030.
$580.00 -
Viper Pro Series 3 Way 1/2 Tube Multi-Directional – For Mounting On The Port Side Of The Boat
$305.00 -
Viper Pro Series 3 Way 1/2 Tube Multi-Directional – For Mounting On The Starboard Side Of The Boat
$305.00 -
Viper Pro Series 3 Way 1/2 Tube Multi-Directional ROD Holders
$540.00Viper Pro Series 3 Way 1/2 Tube Multi-Directional ROD Holders
These are another first by Bell Marine and the ultimate multi-directional 3-way rod holders ever made. Viper Pro Series rod holders allow you to fish in any tide, any current and any wind conditions as you can set the direction by 360 degree and angle your rods up and down by 90 degree all in your existing rod holders! Hand polished to a mirror finish and constructed from 316 marine grade stainless steel, fully welded half tube rod holders will secure your rods and includes solid stainless steel cast bases with our famous Viper 5 YEAR WARRANTY
$540.00 -
Viper Pro Series 3 Way Wire Multi-Directional – For Mounting On The Starboard Side Of The Boat
$244.00 -
Viper Pro Series 3 Way Wire Multi-Directional – Port Side Only
$244.00 -
Viper Pro Series 3 Way Wire Multi-Directional ROD Holders – Pair
$432.00Viper Pro Series 3 Way Wire Multi-Directional ROD Holders – Pair
These are another first by Bell Marine and the ultimate multi-directional 3-way rod holders ever made. Viper Pro Series rod holders allow you to fish in any tide, any current and any wind conditions as you can set the direction by 360 degree and angle your rods up and down by 90 degree all in your existing rod holders! Hand polished to a mirror finish and constructed from 316 marine grade stainless steel, fully welded double wire rod holders secure your rods and include solid stainless steel cast bases with our famous Viper 5 YEAR WARRANTY
$432.00